Grinder pumps are essentially centrifugal pumps fitted with shredding systems to facilitate the transport of solids-filled water. Grinder pump sewer systems are most commonly used in areas where gravity service is not available. Wastewater from homes normally flows downhill through the home’s internal plumbing into the mainline public sewer. However, homes at a lower elevation than the main sewer line are unable to do the same, and they need a pump to force the wastewater up to the gravity of the main sewer line.
A grinder pump works like a garbage disposal- it grinds up wastewater from home and pumps it into the public sewer line. Goulds grinder pumps and Myers Grinder pumps are trustworthy names if you are in the market for grinder pumps.
How do grinder pumps work?
A grinder pump is usually placed in a tank buried in a convenient outdoor location in your property. The tank provides a holding storage capacity for wastewater. Household wastewater and water from appliances such as washing machines flow through the internal plumbing into the grinder pump's holding tank. When the wastewater inside the tank reaches a specific level, the pump will turn on. It will then grind the waste into a fine slurry and pump it into the main sewer line.
A grinder pump is part of the sewer system in many homes and prevents blockage or clogging in public sewer lines. The components of these pumps usually include a tank, pump assembly, level controls, piping and valves, and other electrical components. A grinder pump typically runs for a couple of minutes and turns off automatically when the wastewater level reaches the preset-off level. Grinder pumps are electricity-powered and are connected to a control panel on the side of your house or near the tank. The control panel is connected to a circuit breaker in the electrical panel of your home.
If you are looking for grinder pumps, let’s explore the features of Goulds grinder pumps and Myers Grinder pumps.
Goulds AGS Series
Founded in 1848, Goulds Pumps has been a market leader for more than 170 years. The Goulds AGS Series has a discharge size of 2” NPT. These pumps come with an axial grinder combined with a balanced semi-open impeller that cuts down downtime caused by roping and clogging.
Goulds AGS0511
The Goulds AGS0511 grinder pump comes with a powerful axial grinder combined with semi-open impeller technology that can easily slice through solids and trash found in wastewater without clogging or roping. It has an axial-lobe cutter design in stainless steel with an 8-hole cutting plate to reduce waste to a fine slurry, reducing downtime and service problems. The motor of this grinder pump is designed for continuous operation without damage when fully submerged. If you are looking for a grinder pump that will deliver several years of fine service, this is the one to go for.
Goulds AGS0511,
AGS Series, Grinder Pump
Goulds AGS1012
The Goulds AGS1012 has a 2” NPT discharge and a powerful motor with 1HP. This grinder pump is made of cast iron for high efficiency and is adaptable for guide rail systems. It has an axial-lobe cutter design with an 8-hole cutting plate and semi-open 2 vane impeller that can cut through even the toughest household waste. Its powerful motor can be run continuously without any damage when fully submerged.
Goulds AGS1012,
AGS Series, Grinder Pump
Myers VR1 Series
The Myers VR1 Series of grinder pumps comes with patented axial cutter technology. It can easily cut and grind solids and trash found in domestic wastewater without roping or clogging. These pumps can be very easily installed, and the VR1 Series delivers more flow than other pumps in the market.
Myers 28172D001
The Myers 28172D001 runs at 1 HP, is capable of a Max Head up to 60 ft, maximum capacities of 52 GPM and has a discharge of 2" NPT. It offers easy installation and comes with a lifting handle, piggyback cord, and a standard 20 ft cord. It also offers an automatic switch for quick installation and does not require any external capacitor.
Myers
28172D001, VR1 Series, Model VRS10M-11, Grinder Pump
Myers 28172D002
The Myers 28172D002 grinder pump is perfect for residential sewage pumps that cannot keep up with trash and debris found in residential wastewater. Its patented axial cutter technology cuts through solids and trash found in wastewater, creating a fine slurry without clogging or roping. It runs at 1 HP, has a discharge of 2” NPT, and a maximum capacity of 52 GPM.
Myers
28172D002, VR1 Series, Model VRS10A-21, Grinder Pump
Pump Products
Are you looking for reliable and durable grinder pumps? Pumpproducts.com is a comprehensive platform that sells some of the best grinder pumps in the market, including Goulds grinder pumps and Myers grinder pumps. If you need more information about grinder pumps, their Customer Service Representatives are immensely helpful. Please take a look at the extensive range of grinder pumps by visiting their website today.
