Franklin Electric pumps offer best-in-class submersible pumps for handling situations like flooding or groundwater rise. These pumps are fully dipped in the water that needs to be extracted for use. Submersible pumps can be used for both clean and dirty water.
 |
Franklin
Electric, 96210505, Model 5FR05P4-2W115, Submersible Pump
Installation
To install a Franklin Electric submersible
pump, start with some pre-installation steps. For example, make a quick
inspection of the well's correct depth. Ensure that it has a difference from
ground level to the bottom.
Select the pump size as per the gallons per
minute of water necessary during peak hours. Also, check for the motor size as
per your requirement. Make sure you have all the relevant equipment/tools, like
wire strippers, torque wrench, etc., before starting:
● Prepare and drill the well as per the
interpreted depth
● Transfer the pump or discharge pipe into the
well with the help of a rope.
● After that, connect the pipe to the pump.
Re-check all the connections and see if everything is secured perfectly.
● Install a check valve into the discharge line.
This will prevent any water regurgitation to the well during operations.
● Lastly, connect the pump to the power supply
and turn the power on.
For a proper submersible pump installation,
ensure the drop pipe or pump doesn't get damaged during the process. Also, the
pump should be properly attached to the motor.
Electrical Connections
Electrical connections are extremely important
during Franklin Electric submersible pump installations. Make sure to connect
the control panel and submersible pump with a single wire. Keep the joint
waterproof so you don't encounter any sort of shock or connectivity issue. As
for cable size, check for products that are low on voltage.
For proper electrical connections, do the
following:
Sizing
of the wire - Select the
submersible pump wire size as per your requirements. For residential purposes,
the pump cable should be between 6 to 14 AWG range.
Grounding
the system - Ensure proper
grounding of the submersible systems for a reliable and safe installation. This
will offer safety to people who come in contact with the motor or pipe.
Connect
the pump to the power supply
- Lastly, connect the pump to the power supply carefully. Again, check for any
loose wires or misconnections that may hinder the power connection.
Start-Up and Testing
Once you are done with the pump installation,
start the pump and check whether it's working properly. Here's a step-by-step
guide:
● Prime the pump by pouring water into the
housing till the suction line fills up.
● Turn on the power of the pump and check for
its operations. Ensure that the pressure is within adequate range.
● Make adjustments if required. After that,
ensure regular maintenance of the pump.
As for testing, quickly check for crucial
factors like performance, electricity, and electrical connections once again.
If you face any issue while starting the pump,
say if it stops running in between, check if the pressure switch is correctly
set. Similarly, if the water doesn't come out, inspect the suction line for any
leaks or damages.
Maintenance
Like any other pump, Franklin Electric
submersible pumps require maintenance for durability, longevity, and
efficiency. Here are some quick tips to try:
● Closely inspect the pumps for any damage,
wear, or corrosion.
● Always keep the pump components free from any
accumulations, dirt, or debris.
● Inspect the power cable for any wear or tear.
● Schedule routine maintenance by professionals
once a year.
● Replace the motor bearings when necessary.
● Replace the old/damaged pump motor windings
with new ones.
Troubleshooting
If you encounter any issues with a submersible
pump, here are some troubleshooting steps to follow:
Low
water pressure: Check for
blockages and leakages in the discharge line.
Pump
motor failure: Check if there
is an adequate power supply or call an expert for a quick check.
Reduced
water flow: Check if the impeller
is working fine or if it's damaged.
Noise:
Check if the motor bearings,
impellers, or pump housing is damaged.
Consistent
on/off of pumps: Check if the
pressure switch is functioning properly.
If these fixes don't resolve the issue, call a
professional technician for assistance.
Pump Products
Do you want the best Franklin Electric
submersible pump for your home? Check out Pump Products. We have a large variety of high-quality pumps (and
related products) from the Franklin Electric brand for your needs.
Pump Products is a leading distributor that offers the most cost-efficient deals, so you can
get the desired product without spending a fortune. Also, our executives will
timely deliver your orders to your doorstep and keep you free from any hassle.
We have been serving our clients for many years and can't wait for you to join us too. For more details, contact us at 1-800-429-0800. We'll guide you instantly.
