A condensate removal pump is used to remove condensate from HVAC systems, refrigeration systems, and steam systems. In refrigeration and HVAC processes, the water that is produced due to condensation must be removed from the system. Condensation happens when air blows over the cold evaporator coils, forming moisture that trickles down into the drain pan under the coils.
Some systems use gravity to drain out the water that collects in the drain pan. However, the water that cannot be pumped out by gravity needs to be removed with a condensate removal pump to prevent it from spilling over onto the floor. A good condensate pump is necessary to ensure that you do not find water dripping from the ceiling or all over your furniture.
How do condensate removal pumps work?
A condensate removal pump does not run all the time but intermittently. The pump comes with a tank to hold the moisture that forms due to condensation. When hot air blows over the cooling coils, the moisture in the air condenses on the surface of the coils. The moisture then drips into a tray and then flows down a drain into the condensate pump’s tank that also contains a float switch. As more and more water flows in, the level rises to the top of the tank, lifting the float switch. This activates the pump’s motor, which pumps up the water into a drain pipe. The drain pipe usually leads to the outside of the building into a floor drain or sink.
What are the benefits of a condensate removal pump?
People spend millions of dollars every year repairing indoor water damage. It is essential to properly run and maintain HVAC and air conditioning systems to reduce the risk of water damage. Many systems rely on gravity to remove condensate from HVAC and air conditioning units.
However, in most modern infrastructure, gravity drainage may not be a suitable option. Gravity drainage must be installed next to an outside wall for maximum efficiency. However, if your unit is further away, you will need to install substantial piping, which means you will need to invest more space and money. Also, it is quite common for gravity drains to leak and cause water damage. Gravity drains could also become the breeding ground for bacteria and fungi, posing a significant health risk.
Unlike gravity drainage, condensate removal pumps can easily pump water upwards, which requires a downward trajectory. These pumps are more suited for modern infrastructure and also reduce the risk of bacterial contamination caused by wastewater.
If you are looking for condensate removal pumps, Hartell condensate removal pumps and Hoffman condensate removal pumps are some of the best in the market.
PumpProducts is a stocking Hartell and Hoffman pump distributor and carries a large inventory suited for all your needs.
Hartell Condensate Removal Pumps
Hartell condensate removal pumps were first developed in 1962. Ever since then, they have established themselves as one of the trusted names in the pump industry. Hartell has been supplying a comprehensive line of innovative and high-quality pumps to the HVAC, refrigeration, and plumbing industries for more than 50 years now.
Hartell condensate removal pumps come with a quick-to-connect and serviceable check valve. These pumps also come with a reversible reservoir combined with a low-level inlet. This feature gives you several more installation options according to your requirements and easier maintenance. The materials used in these pumps are chemical and oil resistant, and they can withstand high temperatures, making them long-lasting and durable. The robust design of these pumps also contributes to the performance and long service life.
In the new pumps, Hartell offers motor-bearing protection at three new levels. It protects the motor from water splash and steam, ensuring a longer service life. The A3 and A5 Series condensate removal pumps from Hartell come with a new check valve design that makes for better fluid flow. It also makes these pumps extremely reliable and very quiet.
PumpProducts carries a wide variety of Hartell condensate removal pumps, including the models 861021, 861022, 861023, 861024, 861026, and more.
Hoffman condensate removal pumps
Hoffman is another prominent name in the pump industry, manufacturing products for a wide variety of applications. They offer a whole range of pump solutions for residential and commercial use, promising easy installation and durability.
The Hoffman Watchman Series condensate removal pumps are available in 6, 9, and 14-gallon sizes and are also fitted with 3/16” steel receivers. The Watchman series comes with a bronze impeller and bronze-wearing ring. The motor housing is built of high-quality cast iron, and the ceramic or carbon mechanical seal can withstand temperatures up to 250 degrees. The float switches of these pumps can be adjusted externally, and they also offer in-built overload protection.
The Watchman series also has a low-height NPT inlet for easy return line piping. There is also a separate NPT connection to provide a secondary vent that ensures safe operation. The close-grained, corrosion-resistant receiver made of cast iron is warranted for twenty years from the date of shipment against failure caused by corrosion.
Hoffman pumps are 100% factory wired and tested to ensure reliable operation.
PumpProducts carries several Hoffman condensate removal pumps, including the models 160029, 160010, 160011, 160030, 160012, and more.
PumpProducts
If you are looking for a condensate removal pump for your home or office, look no further. PumpProducts stocks some of the best brands in the market, including Hartell condensate removal pumps and Hoffman condensate removal pumps. If you have queries regarding condensate pumps, please feel free to call our toll-free number 1-800-429-0800 today.
