Thursday, May 18, 2023

How to Install and Maintain Your Franklin Electric Submersible Pump

Franklin Electric pumps offer best-in-class submersible pumps for handling situations like flooding or groundwater rise. These pumps are fully dipped in the water that needs to be extracted for use. Submersible pumps can be used for both clean and dirty water.

Franklin Electric, 96210505, Model 5FR05P4-2W115, Submersible Pump

Although submersible pumps are known for their high efficiency and benefits, they require proper installation. That way, it requires less labour for proper care, maintenance, and good efficiency. Moreover, well-installed submersible pumps can save you from expensive damage.

Installation

To install a Franklin Electric submersible pump, start with some pre-installation steps. For example, make a quick inspection of the well's correct depth. Ensure that it has a difference from ground level to the bottom.

Select the pump size as per the gallons per minute of water necessary during peak hours. Also, check for the motor size as per your requirement. Make sure you have all the relevant equipment/tools, like wire strippers, torque wrench, etc., before starting:

     Prepare and drill the well as per the interpreted depth

     Transfer the pump or discharge pipe into the well with the help of a rope.

     After that, connect the pipe to the pump. Re-check all the connections and see if everything is secured perfectly. 

     Install a check valve into the discharge line. This will prevent any water regurgitation to the well during operations.

     Lastly, connect the pump to the power supply and turn the power on.

For a proper submersible pump installation, ensure the drop pipe or pump doesn't get damaged during the process. Also, the pump should be properly attached to the motor.

Electrical Connections

Electrical connections are extremely important during Franklin Electric submersible pump installations. Make sure to connect the control panel and submersible pump with a single wire. Keep the joint waterproof so you don't encounter any sort of shock or connectivity issue. As for cable size, check for products that are low on voltage.

For proper electrical connections, do the following:

Sizing of the wire - Select the submersible pump wire size as per your requirements. For residential purposes, the pump cable should be between 6 to 14 AWG range.

Grounding the system - Ensure proper grounding of the submersible systems for a reliable and safe installation. This will offer safety to people who come in contact with the motor or pipe.

Connect the pump to the power supply - Lastly, connect the pump to the power supply carefully. Again, check for any loose wires or misconnections that may hinder the power connection.

Start-Up and Testing

Once you are done with the pump installation, start the pump and check whether it's working properly. Here's a step-by-step guide:

     Prime the pump by pouring water into the housing till the suction line fills up.

     Turn on the power of the pump and check for its operations. Ensure that the pressure is within adequate range.

     Make adjustments if required. After that, ensure regular maintenance of the pump.

As for testing, quickly check for crucial factors like performance, electricity, and electrical connections once again.

If you face any issue while starting the pump, say if it stops running in between, check if the pressure switch is correctly set. Similarly, if the water doesn't come out, inspect the suction line for any leaks or damages.

Maintenance

Like any other pump, Franklin Electric submersible pumps require maintenance for durability, longevity, and efficiency. Here are some quick tips to try:

     Closely inspect the pumps for any damage, wear, or corrosion.

     Always keep the pump components free from any accumulations, dirt, or debris.

     Inspect the power cable for any wear or tear.

     Schedule routine maintenance by professionals once a year.

     Replace the motor bearings when necessary.

     Replace the old/damaged pump motor windings with new ones.

Troubleshooting

If you encounter any issues with a submersible pump, here are some troubleshooting steps to follow:

Low water pressure: Check for blockages and leakages in the discharge line.

Pump motor failure: Check if there is an adequate power supply or call an expert for a quick check.

Reduced water flow: Check if the impeller is working fine or if it's damaged.

Noise: Check if the motor bearings, impellers, or pump housing is damaged.

Consistent on/off of pumps: Check if the pressure switch is functioning properly.

If these fixes don't resolve the issue, call a professional technician for assistance.

Pump Products

Do you want the best Franklin Electric submersible pump for your home? Check out Pump Products. We have a large variety of high-quality pumps (and related products) from the Franklin Electric brand for your needs.  

Pump Products is a leading distributor that offers the most cost-efficient deals, so you can get the desired product without spending a fortune. Also, our executives will timely deliver your orders to your doorstep and keep you free from any hassle.

We have been serving our clients for many years and can't wait for you to join us too. For more details, contact us at 1-800-429-0800. We'll guide you instantly.

No comments:

Post a Comment