Boshart Industries is one of the leading and well-known manufacturers/suppliers of well pumps. Their high-quality and innovative products make them one of the best names in the industry. The company has been going strong for six decades for its exclusive pumps and accessories.
 |
Boshart 19-HP, Model BII Pitcher Hand Pump
To help you out, in this guide, we have
covered all the tips and guidelines that are necessary for
maintaining/installing Boshart Industries well pumps. Read till the end to know
it all.To help you out, in this guide, we have covered all the tips and
guidelines that are necessary for maintaining/installing Boshart Industries
well pumps. Read till the end to know it all.
Pre-Installation
Preparation
1.1 Assessing
Water Needs:
Before you start with the main installation
process, we recommend you assess your water needs to get a fair idea of your
well pump size and capacity. The thumb rule is to add one GPM for every
appliance with fixtures.
To get the most accurate interpretation, it's
advised to take professional help from experts rather than doing it on your
own. As these experts are experienced, they can quickly help you with the same.
They can also perform water flow rate and pressure tests to come up with better
recommendations.
1.2 Selecting the Right Well Pump:
Boshart Industries offers different types of
well pumps depending on your requirements. While the list can be diverse, here
are some of them that are quite popular among users:
Submersible
pumps: Ideal for pumping
water from deep grounds, submersible pumps are pumps for wells and borewells. It
must be fully submerged in the pump fluid (hence the name) to deliver the best
performance. Submersible pumps are ideal for both commercial and industrial
purposes.
Jet
pumps: Jet pumps are
above-ground pumps that draw water from the well (with the help of the suction
pipe) and distributes it to the users. Depending on your requirements, jet
pumps can be shallow well or deep well. You can choose between these two
options as per the depth of the well. Jet pumps can be used for residential,
domestic and irrigation purposes.
Hand
pumps: Hand pumps are
manually operated pumps that require human strength to draw the water. It
doesn't work on electricity or air, which are common modes. It has a good edge
over other pumps for its simplicity and economic benefits. Hand pumps can be
used for industrial, commercial, marine and related activities.
If you want to choose the best Boshart
Industries well pumps for yourself, we recommend considering common factors
like water table level, well depth and pump features/specifications. Once you
know these things, it will be easier for you to select the right product.
If you are facing difficulty in interpreting
and understanding the technicalities, consult a professional who is well aware
of well pump installations. You can also directly call the Boshart Industries
representative to get expert advice.
Installation
Guidelines
2.1 Safety
Precautions:
Before you start with the pump installation,
make sure to follow the below safety measures:
● Wear PPE kits that include gloves, safety
goggles, and closed-toe shoes before installation.
● Check whether the power source is turned off
before starting.
● Be aware of the wires and electrical
connections that you touch.
● Keep yourself protected from adjacent live
parts.
2.2 Well
Pump Installation Steps:
After taking the safety precautions, start
your well pump installation process. It's suggested to follow the manual
instructions to do this seamlessly:
Note: Make sure you have all the
tools/equipment handy before starting the process.
● Thoroughly check the well for any unwanted
accumulations/debris and ensure it's clean.
● Carefully lower the pump into the well.
● Connect the pump to the water supply line
through pipe connections. Make sure to use pipe wrenches to secure the pipes
nicely. You also can secure the fittings with the Teflon tape.
● Install a pressure tank by connecting it to
the pump and plumbing system.
● Read the manual for accurate wiring
connections. For the control box, ensure that it's placed in a dry, safe and
heat-free space outside the well.
● Check for any loose wire connections. The
electrical lines should be well-grounded to offer a shield to the line and
prevent any shocks.
● Install your pressure switches. These switches
signal the pumps to either start or stop water pumping.
● You may have to prime the pumps, depending on
their type (like jet pumps). Lastly, test the installation and see if it's
working properly.
Section 3:
Maintenance and Troubleshooting
3.1 Regular
Maintenance Routine:
To ensure the prolonged life of the well
pumps, you must maintain them efficiently. Follow the below tips for the same:
● Clean out any dirt, debris or accumulation
from the cooling fans of your pump.
● Check your pumps for any corrosion or damage.
● Monitor the pumps for any drips or leakages.
● Thoroughly inspect if your pumps need any
repair after any storm or weather-related phenomenon.
● Get it checked by a professional at least once
a year for any mechanical or technical problems.
3.2 Water
Quality Considerations:
Water plays an integral part in high-end well
pump performance. That's why you must use good filtration systems and check
your water for common contaminants. You must also check the pH level of the
water, as both low and high pH can affect the pump components.
To identify the water quality, you can conduct
basic water quality tests and bacterial tests. Additionally, you can monitor
the water visually and smell it for any foul odor.
3.3
Troubleshooting Common Issues:
Low
water pressure: If you face a
low water pressure issue with your well pump, check the pressure tank for any
damages.
Lack
of water: Inspect the suction
line thoroughly if your pump is running but you can't get any water. Check if
it's clogged by any accumulation. Monitor the water levels and check if it's
too low.
Weird
sounds: Weird sounds can be
due to multiple reasons, starting from pipe blockages to impeller issues. If
the sound persists, call a professional immediately and get your pump checked.
Besides these, there can be several other
issues related to your well pumps. Make sure to consult an expert to get it
fixed easily.
Pump
Products
Are you looking for the best well pumps from
Boshart Industries for use? Connect with Pump Products today! We house the finest products from leading
manufacturers and can deliver them to your doorstep ASAP. Call our
professionals to know more.
For more details visit PumpProducts YouTube
Channel.
No comments:
Post a Comment